Nationwide commercial service • qualifying international projects
Movable Partition Wall Installation, Repair & Recovery
ARDIN provides complete movable partition wall services, including new-system installation, inspection, repair, recovery, rust remediation, adhesive correction, and preventive maintenance for operable partitions, movable walls, and airwall systems.
- Hufcor
- Modernfold
- Moderco
Nationwide commercial availabilityQualifying international availabilityNew systems • service • recovery
Operable partitions make flexible rooms possible, but their panels, tracks, carriers, seals, hardware, and finishes must work together. ARDIN evaluates the full system rather than treating every problem as a wallcovering issue.
ARDIN considers the system type, condition, operating behavior, access, schedule, parts availability, finish requirements, and project location when recommending the right service approach.
New system installation
Coordinate a new movable wall from layout through operational testing.
ARDIN installs new operable partitions, movable walls, and airwall systems in coordination with owners, architects, general contractors, and facility teams.
- System planning and layout coordination
- Track and support coordination
- Panel installation
- Hardware installation
- Single-panel systems
- Paired-panel systems
- Folding partition systems
- Track-mounted movable panels
- Final system adjustment
- Operational testing
- Closeout review
- Electrically operated system coordination
Inspection & preventive maintenance
Find developing problems before the wall becomes difficult to operate.
Scheduled inspection and servicing can identify wear, finish failure, alignment problems, and damaged components before they become larger disruptions.
- System and condition assessments
- Operational testing
- Track inspection and cleaning
- Panel inspection
- Seal inspection
- Hardware inspection
- Hanger and carrier assessment
- Finish-condition review
- Identification of worn or damaged components
- Repair, recovery, or replacement recommendations
- Maintenance prioritization
- Ongoing servicing plans
- Maintenance intended to support reliability, appearance, safety, and useful system life
Mechanical repair & operational adjustment
Help walls move, stack, align, close, and seal as their design permits.
Binding, dragging, uneven panels, poor alignment, difficult stacking, and incomplete closure can point to track, carrier, panel, seal, or hardware concerns.
- Track alignment
- Panel alignment
- Operational adjustments
- Panel restoration
- Hardware repair
- Hardware replacement
- Hanger and carrier assessment
- Seal repair or replacement
- Damaged component replacement
- Folding-system service
- Manual movable wall service
- Parts and specialist coordination
Partition recovery & new finishes
Restore worn, stained, damaged, or dated panels without treating the system like an ordinary wall.
Recovery planning accounts for panel movement, edges, hinges, seals, existing adhesive, finish thickness, and the way panels stack and close.
- Existing wallcovering removal where appropriate
- Operable partition panel recovery
- Movable wall and airwall recovery
- Replacement wallcovering
- Replacement vinyl
- Replacement fabric
- Surface preparation
- Adhesive removal and correction
- Edge detailing
- Panel detailing
- Visual refurbishment
- Finish and recover planning
Rust remediation
Address visible corrosion before continued deterioration compromises more of the system.
Rust work begins with an assessment of the affected metal, surrounding finishes, component condition, and whether remediation or replacement is appropriate.
- Visible rust and corrosion identification
- Rust removal
- Affected-metal surface preparation
- Appropriate surface treatment
- Protective coating
- Finish restoration coordination
- Evaluation of continued deterioration
- Component replacement coordination when damage is substantial
Adhesive abatement & failure correction
Correct failed bonds before installing the next panel finish.
Bubbling, lifting, delamination, residue, and incompatible adhesive can affect both appearance and recovery performance.
- Failed or incompatible adhesive removal
- Adhesive-related problem assessment
- Surface cleaning and preparation
- Residue correction
- Appropriate adhesive-system selection
- New adhesive application
- Bubbling and lifting correction
- Delamination and failed-bond correction
- Preparation for wallcovering, vinyl, or fabric
- Test areas when appropriate
Track, panel & hardware service
Review the connected components that control system movement and closure.
Service recommendations reflect the visible condition, operating symptoms, available parts, and system requirements.
- Track systems
- Panel systems
- Hangers and carriers
- Hinges and panel connections
- Operating hardware
- Top and bottom seals
- Panel edges and faces
- Stacking areas
- Acoustic partition interfaces
- Manual operating systems
- Electrical-system coordination
- Replacement-part planning
Systems and spaces we serve
Flexible commercial rooms with operable, folding, acoustic, and track-mounted wall systems.
Conference & Convention Facilities
Corporate Offices
Schools & Universities
Churches & Community Centers
- Event venues
- Meeting rooms
- Restaurants
- Healthcare facilities
- Senior-living facilities
- Government buildings
- Institutional buildings
- Other flexible commercial spaces
Our service process
Define what the system needs before committing to parts, finishes, or repairs.
The sequence is adapted to the project; not every engagement requires every step.
1. Initial Review
ARDIN reviews the location, system information, photographs, dimensions, schedule, and known operating concerns.
2. Inspection
ARDIN examines the track, panels, seals, hardware, finish condition, movement, stacking, alignment, and closure.
3. Findings & Scope
ARDIN documents observations and recommends installation, service, repair, recovery, remediation, or maintenance priorities.
4. Coordination
ARDIN coordinates materials, parts, access, protection, travel, schedule, and system requirements.
5. Field Work
ARDIN completes the installation, repair, recovery, remediation, or maintenance work.
6. Final Testing
ARDIN operates and reviews the system, then documents remaining or closeout items.
7. Maintenance Plan
Provide practical recommendations for future inspection, cleaning, adjustment, finish care, and repair planning.
Authorized project gallery
Installation, service, recovery, remediation, and completed movable wall systems.
Partition FAQ
Plan the service around the system, symptoms, and project conditions.
Does ARDIN install new movable partition wall systems?
Yes. ARDIN installs new operable partition, movable wall, and airwall systems and coordinates system requirements, supports, access, and scheduling with the project team.
Can ARDIN service an existing operable partition?
Yes. ARDIN inspects and services existing systems, including panels, tracks, seals, hardware, operating behavior, finishes, and visible wear.
What causes movable partition walls to become difficult to move?
Possible causes include alignment changes, track debris or damage, worn carriers or hardware, panel problems, seal issues, and system misuse. An inspection is needed before recommending a repair.
Can damaged or dated partition panels be recovered?
Many serviceable panels can be prepared and recovered after the existing finish, adhesive, edges, and panel condition are evaluated.
Can ARDIN replace fabric or vinyl on existing panels?
Yes. ARDIN evaluates the selected material, adhesive, finish thickness, panel condition, edges, and operating requirements before recovery.
Does ARDIN repair tracks and hardware?
Track alignment, hardware repair or replacement, hanger and carrier assessment, and related operational work may be included after the system and parts requirements are reviewed.
What is included in a movable wall inspection?
The review may include operating behavior, tracks, panels, carriers, seals, hardware, alignment, stacking, closure, finish condition, visible corrosion, and documented concerns.
Can ARDIN address rust or corrosion?
ARDIN can identify visible rust, remove corrosion, prepare affected metal, apply an appropriate protective coating, and coordinate replacement when deterioration is substantial.
What is adhesive abatement?
It is the controlled removal or correction of failed, incompatible, or residual adhesive so the panel surface can support the new finish system.
Can failed wallcovering adhesive be corrected?
Often, but the cause, panel surface, existing materials, environmental conditions, and finish requirements must be evaluated before the repair method is selected.
How often should movable partitions be inspected?
The appropriate interval depends on system age, use frequency, operating conditions, prior repairs, and manufacturer guidance. High-use venues may benefit from more frequent review.
Does ARDIN travel for partition projects?
Yes. ARDIN provides commercial movable partition services nationwide.
Does ARDIN serve projects outside the United States?
ARDIN is available for qualifying international movable partition projects.
What information is needed to request an inspection or bid?
Send the project location, system type if known, room use, panel count, dimensions, photographs, operating symptoms, finish concerns, schedule, access conditions, and desired outcome.
Request an inspection or bid